Eternity Bathrooms helps homeowners plan a shower and bathroom that suit local conditions in Brisbane. Our team sets levels, specifies tile types, and coordinates drainage so the shower works day one. We also guide shower design decisions that transform your bathroom without fuss. If you’re planning a bathroom, book a consult and we’ll map options that fit your budget and timeline.
Plan the shower and bathroom layout
Good outcomes start with the bathroom layout and service positions. Set the layout so the shower entry is clear, the shower area has fall, and the toilet and vanity don’t crowd circulation. A builder will plumb wastes and water lines so falls reach the drain consistently. We align walls and doors so the space feels calm and practical.
We waterproof floors and walls before tiling. A licensed team will waterproof the base, corners and penetrations, then screed to the set fall. We confirm levels with the tiler so water from spreading is unlikely. In a small bathroom, a carefully planned corner shower can free up floor and maximise useful movement.
Quick layout checks
- Door swing clears the shower space
- Finished floor falls to drain
- Niche locations avoid studs and plumbing
- Heated floor zones don’t conflict with wastes
A quick scenario: in many Brisbane homes, we offset the entry to keep splash away from the vanity while maintaining sight lines.
Choose the right shower and shower screen
The goal is to make the space feel open yet controlled. Choosing the right shower means balancing entry width, accessibility, and splash. A fixed panel with a frameless shower screen keeps clean lines and reduces maintenance. A thoughtfully sized panel also makes the shower easier to clean.
If you prefer an open shower, we adjust the fall and extend the dry zone. Glass panels positioned correctly protect the rest of the bathroom without closing it in. For families, a main bathroom might use a hinged panel; for ensuites, a walk-through panel suits.
Style and functionality checklist
- Panel height aligns to shower walls
- Door clearances suit mats and rugs
- Handles and fitting finishes match other fixture choices
Drainage design that works
Well-planned drainage stops ponding and helps cleaning. A linear drain along the wall simplifies falls, while a point drain can suit square layouts. We coordinate drainage design with the membrane so movement joints are respected. Floors are graded evenly so the shower dries quickly.
On waterproofing day, we seal penetrations and set puddle flanges as part of the renovation process. Installers plumb trap heights to keep smells away and optimise flow. In practice, linear drains pair nicely with large-format tile to cut cuts.
Drain options at a glance
| Drain type | Best for | Notes |
|---|---|---|
| Linear | Large tile | Fewer cuts, sleek look |
| Point | Compact layout | Centred fall, flexible |
| Tile-insert | Modern bathroom look | Nearly seamless finish |
Common questions on drainage
How much fall should the floor have?
Enough to move water efficiently without discomfort; we set consistent gradients that feel natural to walk on.
Do I need a step?
Not always. With correct falls and panel positioning, zero-threshold is achievable while keeping splash contained.
Will a linear drain block more?
Maintenance is simple. Lift the cover periodically and clear hair to keep performance strong.
Tiles, grout lines and finishes
Surface choice influences safety and cleaning. A textured tile with high slip resistance suits wet zones, while larger pieces reduce grout lines. We specify grout carefully to match tone and resist stains. Feature walls can carry design elements that tie the whole bathroom together.
Large formats maximise space visually, and vertical stacking can make your bathroom look taller. With consistent set-outs, design feature strips and trims stay aligned. We guide edge trims so the bathroom feels considered, not busy.
Finish selection pointers
- Textured floor tile for grip
- Satin wall tile for easy cleaning
- Consider shower niches sized to bottles
A decision tip: choose one hero surface, then support it with quieter tones so creating a bathroom feels cohesive.
Selecting showerheads, tapware and fixtures
Hardware shapes the shower experience. Match showerheads to your water pressure to avoid misty spray. A quality showerhead and durable tapware deliver comfort and style and integrate with your fitting selections. We position outlets so the shower starts without getting you wet.
Choose finishes that echo door hardware for a resolved scheme. Durable fixture choices lower lifetime cost and keep the bathroom tidy. We coordinate heights so controls are easy to reach and away from direct spray.
Heights and spacing
- Rail head: 2000–2100 mm typical
- Mixer: 1000–1100 mm
- Niche: 1100–1200 mm to centre
To decide: test spray patterns in our showroom to find the right shower feel for your family.
Storage, niches and glass panels
Clutter breaks flow. Recessed shower niches add space-saving utility without protrusions. A fixed panel with glass panels sized to your layout keeps shelves dry. We integrate clever storage near the vanity so bottles don’t migrate around the shower.
We also plan towel hooks and rails so drying is easy. Paired with squeegees, surfaces stay clear. This is how clever storage solutions support daily order.
Low-clutter ideas
- Wall-hung vanity to free floor
- Built-in ledge to seat or perch
- Mirror cabinets for hidden storage solutions
A quick scenario: a ledge running through the Brisbane bathroom doubles as seating and product shelf, unifying zones.
Sustainable bathroom choices
A sustainable bathroom focuses on water, longevity and repairability. Choose WELS-rated hardware and hardy surfaces that resist wear. Durable tile and replaceable parts extend life in australian homes. Thoughtful choices deliver savings and resilience.
We also consider ventilation and light to deter mould. Planning pathways for parts makes future upgrades simple in your bathroom project or bathroom remodel.
Sustainability notes
- Water-efficient shower hardware
- Long-life grout and sealants
- Reparable components in a smart bathroom
Consider this: matching warranties across suppliers simplifies future service.
When this may not be the right fit
If the bathroom space is extremely tight, a full screen may be better than a broad walk-through. If structural falls can’t be set, a curbed entry might be safer. Where mobility needs are complex, a broader accessibility assessment may precede a walk-through shower choice.
Extreme splash zones or uneven substrates can challenge outcomes. Talk to a bathroom renovation specialist to weigh constraints before you renovate.
How to judge if you need this now or later
Proceed now if tiles or membranes have failed, or if leaks threaten cabinetry. Delay if you’re waiting on approvals or if related trades aren’t scheduled. The bathroom renovation starts with scope clarity and ends with sign-off, so book time for selections and lead items.
If multiple rooms need work, stage wet areas together to save set-up costs. Clear sequencing keeps the functional space available when you need it.
Where this connects to bathroom renovation guide
This page is your complete guide to walk-in shower design choices and drainage coordination in the context of a larger bathroom renovation. See our bathroom renovation guide for budgets, trades, and permits tied to australian building rules and planning a bathroom renovation steps in a bathroom renovation in Brisbane setting. We align style and functionality across the whole bathroom so selections read as one.
Design ideas often include doorless walk-in shower ideas or a sleek half panel; both rely on correct falls and detailing.
